A dialog between research and practice

Our range of services includes a comprehensive overview of published scientific documentation on our products and technologies. A clinically proven implant system supported by scientific studies gives patients and also you the security of being able to smile without embarrassment even years after treatment.

The present list of publications on the FRIALIT® implant system provides a systematic survey of studies, which document the clinical application of the FRIALIT® implant system and the FRIADENT® plus surface. The studies are sorted according to specific topics to make it easier for you to find what you are looking for. Please note that a single article therefore may appear in more than one category. The different categories contain only articles published in peer-reviewed journals and listed in PubMed. The bibliographical information includes a link to PubMed, where you can read the abstract.

FRIALIT® literature list

In-vitro experiments

  1. Al-Ghafli SA, Michalakis KX, Hirayama H, Kang K:
    The in vitro effect of different implant angulations and cyclic dislodgement on the retentive properties of an overdenture attachment system.
    J Prosthet Dent; 2009; 102 (3): 140-147 [# 8930]
    View abstract in PubMed

  2. Gomez-Roman G, Lukas D, Beniashvili R, Schulte W:
    Area-dependent enlargement ratios of panoramic tomography on orthograde patient positioning and its significance for implant dentistry.
    Int J Oral Maxillofac Implants; 1999; 14 (2): 248-257 [# 1381]
    View abstract in PubMed

  3. Jansen VK, Conrads G, Richter EJ:
    Microbial leakage and marginal fit of the implant-abutment interface.
    Int J Oral Maxillofac Implants; 1997; 12 (4): 527-540 [# 1766]
    View abstract in PubMed

  4. Kreisler M, Al Haj H, Gotz H, Duschner H, d'Hoedt B: 
    Effect of simulated CO2 and GaAlAs laser surface decontamination on temperature changes in Ti-plasma sprayed dental implants.
    Lasers Surg Med; 2002; 30 (3): 233-239 [# 2061]
    View abstract in PubMed

  5. Lachmann S, Laval JY, Jager B, Axmann D, Gomez-Roman G, Groten M, Weber H:
    Resonance frequency analysis and damping capacity assessment. Part 2: peri-implant bone loss follow-up. An in vitro study with the Periotest and Osstell instruments.
    Clin Oral Implants Res; 2006; 17 (1): 80-84 [# 6507]
    View abstract in PubMed

  6. Lachmann S, Jager B, Axmann D, Gomez-Roman G, Groten M, Weber H:
    Resonance frequency analysis and damping capacity assessment. Part I: an in vitro study on measurement reliability and a method of comparison in the determination of primary dental implant stability.
    Clin Oral Implants Res; 2006; 17 (1): 75-79 [# 2111]
    View abstract in PubMed

  7. Lee YJ, Heo SJ, Koak JY, Kim SK:
    Accuracy of different impression techniques for internal-connection implants.
    Int J Oral Maxillofac Implants; 2009; 24 (5): 823-830 [# 9088]
    View abstract in PubMed

  8. Lorenzoni M, Pertl C, Penkner K, Polansky R, Sedaj B, Wegscheider WA:
    Comparison of the transfer precision of three different impression materials in combination with transfer caps for the Frialit-2 system.
    J Oral Rehabil; 2000; 27 (7): 629-638 [# 2249]
    View abstract in PubMed

  9. Nkenke E, Hahn M, Weinzierl K, Radespiel-Troger M, Neukam FW, Engelke K:
    Implant stability and histomorphometry: a correlation study in human cadavers using stepped cylinder implants. Clin Oral Implants Res; 2003; 14 (5): 601-609 [# 6565]
    View abstract in PubMed

  10. Payer M, Kirmeier R, Jakse N, Pertl C, Wegscheider W, Lorenzoni M:
    Surgical factors influencing mesiodistal implant angulation.
    Clin Oral Implants Res; 2008; 19 (3): 265-270 [# 7556]
    View abstract in PubMed

  11. Rupp F, Scheideler L, Rehbein D, Axmann D, Geis-Gerstorfer J:
    Roughness induced dynamic changes of wettability of acid etched titanium implant modifications.
    Biomaterials; 2004; 25 (7-8): 1429-1438 [# 7603]
    View abstract in PubMed

  12. Schicho K, Kastner J, Klingesberger R, Seemann R, Enislidis G, Undt G, Wanschitz F, Figl M, Wagner A, Ewers R:
    Surface area analysis of dental implants using micro-computed tomography.
    Clin Oral Implants Res; 2007; 18 (4): 459-464 [# 7558]
    View abstract in PubMed

  13. Schulze RK, d'Hoedt B:
    Mathematical analysis of projection errors in "paralleling technique" with respect to implant geometry.
    Clin Oral Implants Res; 2001; 12 (4): 364-371 [# 3441]
    View abstract in PubMed

  14. Steinebrunner L, Wolfart S, Bossmann K, Kern M:
    In vitro evaluation of bacterial leakage along the implant-abutment interface of different implant systems.
    Int J Oral Maxillofac Implants; 2005; 20 (6): 875-881 [# 3621]
    View abstract in PubMed

  15. Wenz HJ, Hertrampf K:
    Accuracy of impressions and casts using different implant impression techniques in a multi-implant system with an internal hex connection.
    Int J Oral Maxillofac Implants; 2008; 23 (1): 39-47 [# 5360]
    View abstract in PubMed

Finite Elements Method (FEM)

  1. Lin CL, Wang JC:
    Nonlinear finite element analysis of a splinted implant with various connectors and occlusal forces.
    Int J Oral Maxillofac Implants; 2003; 18 (3): 331-340 [# 2203]
    View abstract in PubMed

  2. Lin CL, Chang SH, Wang JC:
    Finite element analysis of biomechanical interactions of a tooth-implant splinting system for various bone qualities.
    Chang Gung Med J; 2006; 29 (2): 143-153 [# 2202]
    View abstract in PubMed

  3. Lin CL, Chang SH, Wang JC, Chang WJ:
    Mechanical interactions of an implant/tooth-supported system under different periodontal supports and number of splinted teeth with rigid and non-rigid connections.
    J Dent; 2006; 34 (9): 682-691 [# 9073]
    View abstract in PubMed

  4. Lin CL, Wang JC, Kuo YC:
    Numerical simulation on the biomechanical interactions of tooth/implant-supported system under various occlusal forces with rigid/non-rigid connections.
    J Biomech; 2006; 39 (3): 453-463 [# 9074]
    View abstract in PubMed

  5. Lin CL, Wang JC, Chang WJ:
    Biomechanical interactions in tooth-implant-supported fixed partial dentures with variations in the number of splinted teeth and connector type: a finite element analysis.
    Clin Oral Implants Res; 2008; 19 (1): 107-117 [# 5216]
    View abstract in PubMed

  6. Lin CL, Wang JC, Ramp LC, Liu PR:
    Biomechanical response of implant systems placed in the maxillary posterior region under various conditions of angulation, bone density, and loading.
    Int J Oral Maxillofac Implants; 2008; 23 (1): 57-64 [# 6700]
    View abstract in PubMed

FRIALIT Bibliography.

FRIADENT plus Bibliography.

A reference list on the original articles published in peer reviewed journals on DENTSPLY Implants products.